Metal briquetting machine, including metal chip briquetting machine and metal baling machine

Metal briquetting machine: including metal chip briquetting machine and metal baling machine, which directly cold-presses various metal scraps through high pressure to facilitate storage, transportation and recycling.

The metal chip briquetting machine can directly cold-press powdery cast iron chips, steel chips, copper chips, aluminum chips, high-quality mineral powder, etc. into cakes for easy storage, transportation, and furnace recycling. After being pressed into blocks and put into the furnace for recycling, the loss is extremely low. The entire production process does not require heating, adding additives or other processes, and is directly cold-pressed to form. This ensures that the original material remains unchanged during forming. For example, cast iron chips are formed and used instead of cast pig iron. For castings made of special materials, recycling is of greater significance. The metal baler can squeeze various relatively large metal scraps, scrap steel, scrap iron, scrap copper, scrap aluminum, dismantled car shells, waste oil barrels, etc. into qualified furnace materials of various shapes such as rectangular cubes, cylinders, and octagons. To facilitate storage, transportation and recycling.

Features：

1. All models of metal balers are hydraulically driven (or diesel driven);

2. The discharging mode of the machine can be selected from different methods such as turning the bag, pushing the bag or manually taking the bag;

3. It is easy to install and does not require foot fixation. In places where there is no power supply, a diesel engine can be used as power;

4. There are ten levels of extrusion force from 63 tons to 400 tons for users to choose, and the production efficiency ranges from 5 tons/shift to 50 tons/shift;

Features and Benefits

1. The hydraulic metal chip briquetting machine is mainly used to press various metal chips (iron chips, copper chips, aluminum chips, etc.), granular metal powders (iron powder, aluminum powder, copper powder, lead powder, etc.), smelting additives, sponge iron, etc. into high-density cylindrical cakes (heavy-weighted cakes) without adding any adhesive. The weight of the cake is 2-8 kg), and the density of the cake can reach more than 5T/M3 (the raw materials are different, and the density and weight of the pressed cake are different). The pressed cake can be directly put into the furnace for use. The grade of cast iron can reach HT200-250, and the cost can be saved by about 700 yuan per ton of castings.

2. Adopt advanced hydraulic transmission technology, use high-quality wear-resistant oil seals, and the cylinder is processed and assembled using the latest domestic high-tech technology to ensure continuous operation without weakening the cylinder pressure, durability and smooth operation; computer control, high degree of automation, low failure rate, easy maintenance, etc.